16Mo3

Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Standard:
EN 10217-2

General

Material number (EN 10027-2)1.5415
Previous steel designation-

Mechanical Properties

Yield strength
Rp0.2 / Rt0.5 MPa (~ in PSI)		Min: 280 (40 600)**Max: -
Tensile strength
Rm MPa (~ in PSI)		Min: 450 (65 300)Max: 600 (87 000)
Elongation
(% min.)		Transverse: 20Longitudinal: 22
Impact strength
Test temperature: 20		Transverse: 27Longitudinal: 40
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C0.120.2
Si-0.35
Mn0.40.9
P-0.025
S-0.02
B--
Nb--
V--
Alges-0.04
Ti--
Cr-0.3
Ni-0.3
Mo0.250.35
Cu-0.3*
N--
Maximum CEV value (%): -

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size