S235JRH

Technology:
HFI-welded steel pipes
HFI-welded steel pipes with subsequent hot profiling
Spiral-weld large-diameter pipes
Standard:
EN 10210-1

General

Material number (EN 10027-2)1.0039
Previous steel designation-

Mechanical Properties

Yield strength
Rp0.2 / Rt0.5 MPa (~ in PSI)		Min: 235 (34 100)**Max: -
Tensile strength
Rm MPa (~ in PSI)		Min: 360 (52 200)Max: 510 (74 000)
Elongation
(% min.)		Transverse: 24Longitudinal: 26
Impact strength
Test temperature: 20		Transverse: 27Longitudinal: **
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C-0.17**
Si--
Mn-1.4
P-0.04
S-0.04
B--
Nb--
V--
Alges****
Ti--
Cr--
Ni--
Mo--
Cu--
N-0.009**
Maximum CEV value (%): 0.37**

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size