P215NL

Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Standard:
EN 10217-4

General

Material-Number (EN 10027-2)1.0451
Previous steel designation-

Mechanical Properties

Yield strength
Rt0,5 MPa (in PSI)		Min: 215 (31 200)Max: -
Tensile strength
Rm MPa (in PSI)		Min: 360 (52 200)Max: 480 (69 600)
Elongation
(% min.)		Quer: 23Längs: 25
Impact strength
Test temperature: -40 / -20 / 20		Quer: -Längs: 40 / 45 / 55**
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C-0,15
Si-0,35
Mn0,41,2
P-0,025
S-0,02
B--
Nb-0,01
V-0,02
Alges0,02**-
Ti-0,03
Cr-0,3
Ni-0,3
Mo-0,08
Cu-0,3
N--
Maximum CEV value (%): -

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size