L415NE / X60NE
Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Spiral-weld large-diameter pipes
Standard:
EN ISO 3183 (PSL 2), Annex A
General
| Material number (EN 10027-2) | 1.8972 |
|---|---|
| Previous steel designation | L415NB |
Mechanical Properties
| Yield strength Rp0.2 / Rt0.5 MPa (~ in PSI) | Min: 415 (60 200) | Max: 565 (81 900) |
|---|---|---|
| Tensile strength Rm MPa (~ in PSI) | Min: 520 (75 400) | Max: 760 (110 200) |
| Elongation (% min.) | Transverse: 18 | Longitudinal: 20 |
| Impact strength Test temperature: 0* | Transverse: 40 | Longitudinal: ** |
| Hardness (max. HRC) | - | |
Chemical composition
| Mass fractions in % | Min | Max |
|---|---|---|
| C | - | 0.23** |
| Si | - | 0.45* |
| Mn | - | 1.4* |
| P | - | 0.025 |
| S | - | 0.015 |
| B | - | - |
| Nb | - | 0.05* |
| V | - | 0.1* |
| Alges | 0.015** | 0.06** |
| Ti | - | 0.04* |
| Cr | - | 0.3 |
| Ni | - | 0.3 |
| Mo | - | 0.1* |
| Cu | - | 0.25 |
| N | - | 0.012** |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size