L245ME / BME

Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Standard:
EN ISO 3183 (PSL 2), Annex A

General

Material number (EN 10027-2)1.0418
Previous steel designationL245MB

Mechanical Properties

Yield strength
Rp0.2 / Rt0.5 MPa (~ in PSI)		Min: 245 (35 500)Max: 440 (63 800)
Tensile strength
Rm MPa (~ in PSI)		Min: 415 (60 200)Max: 760 (110 200)
Elongation
(% min.)		Transverse: 22Longitudinal: 24
Impact strength
Test temperature: 0*		Transverse: 40Longitudinal: **
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C-0.18**
Si-0.45
Mn-1.2**
P-0.025
S-0.015
B--
Nb-0.05
V-0.05
Alges0.015**0.06**
Ti--
Cr-0.3
Ni-0.3
Mo-0.1
Cu-0.25
N-0.012**
Maximum CEV value (%): 0.4

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size