L290M / X42M
Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Spiral-weld large-diameter pipes
Standard:
API 5L (PSL 2)
General
| Material number (EN 10027-2) | - |
|---|---|
| Previous steel designation | - |
Mechanical Properties
| Yield strength Rp0.2 / Rt0.5 MPa (~ in PSI) | Min: 290 (42 100) | Max: 495 (71 800) |
|---|---|---|
| Tensile strength Rm MPa (~ in PSI) | Min: 415 (60 200) | Max: 655 (95 000) |
| Elongation (% min.) | Transverse: ** | Longitudinal: ** |
| Impact strength Test temperature: 0 | Transverse: 27** | Longitudinal: ** |
| Hardness (max. HRC) | - | |
Chemical composition
| Mass fractions in % | Min | Max |
|---|---|---|
| C | - | 0.22** |
| Si | - | 0.45 |
| Mn | - | 1.3** |
| P | - | 0.025 |
| S | - | 0.015 |
| B | - | 0.001 |
| Nb | - | 0.05 |
| V | - | 0.05 |
| Alges | - | - |
| Ti | - | 0.04 |
| Cr | - | 0.3* |
| Ni | - | 0.3* |
| Mo | - | 0.15* |
| Cu | - | 0.5* |
| N | - | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size