P265NL

Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Standard:
EN 10217-4

General

Material number (EN 10027-2)1.0453
Previous steel designation-

Mechanical Properties

Yield strength
Rp0.2 / Rt0.5 MPa (~ in PSI)		Min: 265 (38 400)Max: -
Tensile strength
Rm MPa (~ in PSI)		Min: 410 (59 500)Max: 570 (82 700)
Elongation
(% min.)		Transverse: 22Longitudinal: 24
Impact strength
Test temperature: -40 / -20 / 20		Transverse: 27 / 30 / 35Longitudinal: 40 / 45 / 50
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C-0.2
Si-0.4
Mn0.61.4
P-0.025
S-0.02
B--
Nb-0.01
V-0.02
Alges0.02**-
Ti-0.03
Cr-0.3
Ni-0.3
Mo-0.08
Cu-0.3
N--
Maximum CEV value (%): -

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size