16Mo3

Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Standard:
EN 10217-2

General

Material-Number (EN 10027-2)1.5415
Previous steel designation-

Mechanical Properties

Yield strength
Rt0,5 MPa (in PSI)		Min: 280 (40 600)**Max: -
Tensile strength
Rm MPa (in PSI)		Min: 450 (65 300)Max: 600 (87 000)
Elongation
(% min.)		Quer: 20Längs: 22
Impact strength
Test temperature: 20		Quer: 27Längs: 40
Hardness
(max. HRC)		-

Chemical composition

Mass fractions in %MinMax
C0,120,2
Si-0,35
Mn0,40,9
P-0,025
S-0,02
B--
Nb--
V--
Alges-0,04
Ti--
Cr-0,3
Ni-0,3
Mo0,250,35
Cu-0,3*
N--
Maximum CEV value (%): -

This information is supplied without liability.

* negotiable or negotiable under further restrictions

** further restrictions are specified or value applies only for specific pipe size