HFW 360N (+suffix)
Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Spiral-weld large-diameter pipes
Standard:
DNV-ST-F101
General
| Material number (EN 10027-2) | - |
|---|---|
| Previous steel designation | - |
Mechanical Properties
| Yield strength Rp0.2 / Rt0.5 MPa (~ in PSI) | Min: 360 (52 200)** | Max: 525 (76 100)** |
|---|---|---|
| Tensile strength Rm MPa (~ in PSI) | Min: 460 (66 700)** | Max: 760 (110 200)** |
| Elongation (% min.) | Transverse: ** | Longitudinal: ** |
| Impact strength Test temperature: * | Transverse: 36 | Longitudinal: ** |
| Hardness (max. HRC) | - | |
Chemical composition
| Mass fractions in % | Min | Max |
|---|---|---|
| C | - | 0.16** |
| Si | - | 0.45 |
| Mn | - | 1.65** |
| P | - | 0.02 |
| S | - | 0.01 |
| B | - | 0.0005 |
| Nb | - | 0.05** |
| V | - | 0.05** |
| Alges | - | - |
| Ti | - | 0.04** |
| Cr | - | - |
| Ni | - | - |
| Mo | - | - |
| Cu | - | - |
| N | - | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size