Grade 6
Technology:
HFI-welded steel pipes
Spiral-weld large-diameter pipes
Spiral-weld large-diameter pipes
Standard:
ASTM A 333
General
| Material number (EN 10027-2) | - |
|---|---|
| Previous steel designation | - |
Mechanical Properties
| Yield strength Rp0.2 / Rt0.5 MPa (~ in PSI) | Min: 240 (35 000) | Max: - |
|---|---|---|
| Tensile strength Rm MPa (~ in PSI) | Min: 415 (60 000) | Max: - |
| Elongation (% min.) | Transverse: ** | Longitudinal: ** |
| Impact strength Test temperature: ** | Transverse: ** | Longitudinal: ** |
| Hardness (max. HRC) | - | |
Chemical composition
| Mass fractions in % | Min | Max |
|---|---|---|
| C | - | 3.3 |
| Si | - | - |
| Mn | - | 1.5 |
| P | - | 0.08 |
| S | - | 0.048 |
| B | - | - |
| Nb | - | - |
| V | - | 0.08** |
| Alges | - | - |
| Ti | - | - |
| Cr | - | 0.4** |
| Ni | - | 0.4** |
| Mo | - | 0.15** |
| Cu | - | 0.5** |
| N | - | - |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size