S355NLHHO
Technology:
HFI-welded steel pipes
HFI-welded steel pipes with subsequent hot profiling
HFI-welded steel pipes with subsequent hot profiling
Standard:
EN 10225-3
General
| Material number (EN 10027-2) | 1.1182 |
|---|---|
| Previous steel designation | S355G13+N |
Mechanical Properties
| Yield strength Rp0.2 / Rt0.5 MPa (~ in PSI) | Min: 355 (51 500)** | Max: - |
|---|---|---|
| Tensile strength Rm MPa (~ in PSI) | Min: 460 (66 700) | Max: 620 (90 000) |
| Elongation (% min.) | Transverse: - | Longitudinal: 22 |
| Impact strength Test temperature: -40 | Transverse: ** | Longitudinal: 50 |
| Hardness (max. HRC) | - | |
Chemical composition
| Mass fractions in % | Min | Max |
|---|---|---|
| C | - | 0.18 |
| Si | 0.15 | 0.55 |
| Mn | - | 1.6 |
| P | - | 0.025 |
| S | - | 0.015 |
| B | - | 0.0008 |
| Nb | - | 0.05** |
| V | - | 0.12** |
| Alges | 0.02** | 0.06** |
| Ti | - | 0.02** |
| Cr | - | 0.25** |
| Ni | - | 0.3** |
| Mo | - | 0.08** |
| Cu | - | 0.35** |
| N | - | 0.02 |
This information is supplied without liability.
* negotiable or negotiable under further restrictions
** further restrictions are specified or value applies only for specific pipe size